If you would like to come visit we require an appointment be made at least 24 hours in advance of your arrival. We only have appointments available in the afternoon.

Walk-ins are not allowed.

1075 Blade Stock - 3/16" x 2"

In stock

1075 Cold Rolled & Annealed.   Sometimes can be classified as 1080 due to carbon rating variance per pour.

Many beginners start with our 1075/80, It is a eutectoid steel very similar in characteristics to 1084.

Sold in 18" lengths

These are designated with a DARK BLUE painted end

Item #
1075-316x2
$15.00

1075 Cold Rolled & Annealed.   Sometimes can be classified as 1080 due to carbon rating variance per pour.

Many beginners start with our 1075/80, It is a eutectoid steel very similar in characteristics to 1084.

Sold in 18" lengths

These are designated with a DARK BLUE painted end

1075 Cold Rolled & Annealed.   Sometimes can be classified as 1080 due to carbon rating variance per pour.

Many beginners start with our 1075/80, It is a eutectoid steel very similar in characteristics to 1084.

Sold in 18" lengths

These are designated with a DARK BLUE painted end

1075 Cold Rolled & Annealed.   Sometimes can be classified as 1080 due to carbon rating variance per pour.

Many beginners start with our 1075/80, It is a eutectoid steel very similar in characteristics to 1084.

Sold in 18" lengths

These are designated with a DARK BLUE painted end

1075/80 is our medium-high carbon steel for sale. Cold Rolled and Annealed is often used in place of 1084 as it is more readily available. 

Many beginners start with our 1075/80, It is a eutectoid steel very similar in characteristics to 1084.

This is a continuous cast, fine grain, fully killed steel (#5 or better). Material is low phosphorus, low sulfur, calcium treated to enhance internal cleanliness.

In the as-rolled condition, material is well suited for abrasion resistant applications. In the annealed condition, the material may be cold formed (hot forming suggested for critical bends) with excellent heat treat results.

STANDARD SPECIFICATIONS: ASTM 684-17

TYPICAL ANALYSIS: C .69/.80 Mn .40/.80 P .020 max. S .025 max Si.15/.30

TYPICAL HARDNESS:   Cold Rolled Spherically Annealed, RB 85: 

TYPICAL APPLICATIONS: Blades, brackets, clutches, hand tools, springs, scrapers, washers, & wear strips

Sold in 18" lengths

Write Your Own Review
You're reviewing:1075 Blade Stock - 3/16" x 2"
Your Rating