If you would like to come visit we require an appointment be made at least 24 hours in advance of your arrival. We only have appointments available in the afternoon.
Walk-ins are not allowed.
Build Your Own Hydraulic Forging Press
In stock
Building a Hydraulic Forging Press by Jim Batson
Item #
Batson press
$30.00
Building a Hydraulic Forging Press by Jim Batson
Building a Hydraulic Forging Press by Jim Batson
Building a Hydraulic Forging Press by Jim Batson
Build Your Own Hydraulic Forging Press by Jim Batson
- Newest edition
- Soft cover
- copywrite 1994
- Dimentions: 8 1/2" x 11"
- Pages: 46
- Illustrations: 35
This book and drawings are designed to help you build your own 24 ton Hydraulic Forging Press. A two horsepower 220 volt single phase motor running at 1725 RPM powers a 5.5 gallon per minute "Hi-Lo" hydraulic pump. Ram force of 24 tons is applied by a 5" diameter double acting hydraulic cylinder at 2500 psi pressure. The movement of the ram die is controlled by a 4 way, 3 position hydraulic valve. The length of the ram stroke is 8". The maximum speed of the ram is 1.1 inches per second. The ram speed can be doubled by using a 5 horsepower electric motot running at 3600 RPM. A section is included which will enable you to alter a Log Splitter for use as a Forging Press
Write Your Own Review