Kanca Forged Anvils
See picture/image of chart for sizing & specs. Please note that areas that do not have a designated hrc value may not be considered general forging surfaces and therefore may have a hardness that is lower (30-40hrc)
Please call to order anvils over 150 lbs.
Anvils over 150 lbs. must ship by truck and sshipping charges on products over 150 lbs. cannot be calculated on our website.
See picture/image of chart for sizing & specs. Please note that areas that do not have a designated hrc value may not be considered general forging surfaces and therefore may have a hardness that is lower (30-40hrc)
Please call to order anvils over 150 lbs.
Anvils over 150 lbs. must ship by truck and sshipping charges on products over 150 lbs. cannot be calculated on our website.
See picture/image of chart for sizing & specs. Please note that areas that do not have a designated hrc value may not be considered general forging surfaces and therefore may have a hardness that is lower (30-40hrc)
Please call to order anvils over 150 lbs.
Anvils over 150 lbs. must ship by truck and sshipping charges on products over 150 lbs. cannot be calculated on our website.
See picture/image of chart for sizing & specs. Please note that areas that do not have a designated hrc value may not be considered general forging surfaces and therefore may have a hardness that is lower (30-40hrc)
Please call to order anvils over 150 lbs.
Anvils over 150 lbs. must ship by truck and sshipping charges on products over 150 lbs. cannot be calculated on our website.
Very thick forged tool steel Plate.
In 4 different sizes, these Kanka forged anvils are the closest relative to the well known Ridgid-Peddinghaus Anvils that have been the #1 for decades.
Drop forged in Turkey.
Check out its similarity to forged anvils sold by others.
*note hardy hole sizes are in millimeters (22mm=0.8661", 25mm=0.9843")
**Please call to get shipping cost and order for weights over 150 lbs.**
Finish on curved working surfaces of Anvils (Horns) MAY require final finishing and polishing by Master Blacksmith if desired.