1075/80 Blade Stock - 3/16 x 1.25 x 18"

In stock
Only 10 left

1075/80 Cold Rolled and Annealed Carbon Steel.   Sometimes can be clasified as 1080 due to carbon rating variance per pour.

Many beginners start with our 1075/80, It is a eutectoid steel very similar in characteristics to 1084.

Sold in 18" lengths

These are designated with a DARK BLUE painted end

Item #
1075/80-316x125x18
$10.00

1075/80 Cold Rolled and Annealed Carbon Steel.   Sometimes can be clasified as 1080 due to carbon rating variance per pour.

Many beginners start with our 1075/80, It is a eutectoid steel very similar in characteristics to 1084.

Sold in 18" lengths

These are designated with a DARK BLUE painted end

1075/80 Cold Rolled and Annealed Carbon Steel.   Sometimes can be clasified as 1080 due to carbon rating variance per pour.

Many beginners start with our 1075/80, It is a eutectoid steel very similar in characteristics to 1084.

Sold in 18" lengths

These are designated with a DARK BLUE painted end

1075/80 Cold Rolled and Annealed Carbon Steel.   Sometimes can be clasified as 1080 due to carbon rating variance per pour.

Many beginners start with our 1075/80, It is a eutectoid steel very similar in characteristics to 1084.

Sold in 18" lengths

These are designated with a DARK BLUE painted end

1075/80 is a medium-high carbon steel, Cold Rolled and Annealed, is often used in place of 1084 as it is more readily available. 

Many beginners start with our 1075/80, It is a eutectoid steel very similar in characteristics to 1084.

This is a continuous cast, fine grain, fully killed steel (#5 or better). Material is low phosphorus, low sulfur, calcium treated to enhance internal cleanliness.

In the as-rolled condition, material is well suited for abrasion resistant applications and Damascus-making. In the annealed condition, the material may be cold formed (hot forming suggested for critical bends) with excellent heat treat results.

STANDARD SPECIFICATIONS: ASTM A684-17

TYPICAL ANALYSIS: C .69/.80 Mn .40/.80 P .020 max. S .025 max Si.15/.30

TYPICAL HARDNESS:   Cold Rolled, Spherically annealed, RB 85

TYPICAL APPLICATIONS: Blades, brackets, clutches, hand tools, springs, scrapers, washers, & wear strips

Sold in 18" lengths

Write Your Own Review
You're reviewing:1075/80 Blade Stock - 3/16 x 1.25 x 18"
Your Rating