ITC-100 High Temp Ceramic Coating
ITC -100 is a high temperature ceramic coating, designed and proven to achieve outstanding energy savings and refractory protection. TIt can be used alone or as a base coat for other ITC products.
Applications include coating Kaowool, Inswool or other soft friable refractories including lightweight castable and insulating bricks.
1 Pint container - coats up to 12" sq. ft.
MIXING and APPLICATION
To mix, simply add ½ container (1/2 pint) of water to one full container of ITC 100HT. Use only clean potable water with temperatures between 400 F and 850 F (50 C and 300 C).
Clean surface of loose debris and moisten surface.
Apply several thin and thorough coats. Pay special attention to corners and tight areas. Allow at least 24 hours, but preferably 48 between each coat and prior to firing. Spraying with a texture pairting system is recommended but paint brush may be used. Two coat required when using a paint brush.