1095 Blade Stock - 3/16" x 2"

In stock
Item #
1095-3/16x2
$15.00
  • Buy 6 for $14.00 each and save 7%

1095 Cold Rolled & annealed

1095 steel flat stock is hot rolled and sold in 18" lengths.

These are designated with a YELLOW painted end

High Carbon 1095 Cold-Rolled and Annealed Steel

The highest of the carbon grades, this is a continuous cast, fine grain, fully killed steel (#5 or better). Material is low phosphorus, low sulfur, calcium treated to enhance internal cleanliness.

In the as-rolled condition, material is well suited for abrasion resistant applications. In the annealed condition, the material may be cold formed (hot forming suggested for critical bends) with excellent heat treat results.

STANDARD SPECIFICATIONS: ASTM A568 (sheets) A830 (plates)

TYPICAL ANALYSIS: C .90/1.04 Mn .30/.50 P .020 max. S .025 max Si.15/.30

TYPICAL HARDNESS:   Annealed: Rockwell C 15-45 Approx.

TYPICAL APPLICATIONS: Blades, hand tools, knives, shims, & springs 

Flat stock steel sold in 18" lengths

Write Your Own Review
You're reviewing:1095 Blade Stock - 3/16" x 2"
Your Rating